How to Use a Pocket Pussy: A Simple Beginner’s Guide
A pocket pussy is simple to use once you know how to prepare it, apply lubricant, and handle the channel gently. Product shapes and internal structures vary, so always follow the instructions for your specific model.
If you are still deciding which format suits you, read our guide to choosing a realistic male masturbator .
Prepare before use
Read the product instructions and check the exterior and channel for visible damage. Have water-based lubricant and a clean towel ready.
Routine use does not require soaking or wetting the product beforehand. If the instructions for a new model call for cleaning before its first use, follow those instructions.
Apply water-based lubricant
Apply water-based lubricant directly around the opening and inside the channel, following the directions for your model.
Start with enough to coat the contact area, then add more if friction feels too strong. There is no single amount that works for every product or person.
Start gently and adjust
Hold the product securely and begin at a comfortable pace. Let the channel guide your movement rather than forcing the material, twisting it hard, or pressing sharp nails or objects against it.
If you feel pain or irritation, stop and check what is causing it before continuing.
Rinse and dry after use
Follow the cleaning instructions for your specific model. Where the instructions allow rinsing, flush the channel and clean the exterior as directed. Dry both thoroughly before storage.
Do not assume every model can be immersed, turned inside out, or cleaned with the same products.
For additional care information, see the MRLDOLL cleaning and maintenance guide and check the instructions supplied with your product.
Frequently asked questions
Do I need to wet a pocket pussy before use?
Routine use does not require soaking or wetting it beforehand. Apply water-based lubricant directly, and follow the model’s instructions if they specify a first-use cleaning step.
How much lubricant should I use?
Start with enough water-based lubricant to coat the opening and channel as directed. Add more if you notice too much friction.
How should I clean it afterward?
Follow the model-specific cleaning instructions. Rinse the channel only where the instructions allow it, and make sure the product is fully dry before storing.